Beautiful fit, leather is soft and easy to work with. By far the easiest cover i’ve put on, even if sewing it was time consuming. The end product was worth it, however. Once installed, it has a lovely grip on the wheel itself so theres no chance of it shifting while driving.

I bought this for my 2024 Toyota Camry. It fits perfectly and looks awesome.

Great! Put it on my 4runner. At first it didnt fit but wet the leather and ease it on there and fits perfect. Take your time stitching and do it neatly and you will have an almost oem spec steering wheel wrap for 15$

IMPRESSIVE. I bought a suede one that barely fit and bought this and came out pretty good. Just be gentle when going over the wider or thicker part of your wheel, the threads on the cover itself are thick enough but definitely will snap (i’m just forceful with it). The thread you use to stitch feels waxed but does hold pretty good. Bought the red cover as well and will definitely keep as a back up. I kinda messed up on mine but it came out ridiculously decent.2017 audi A4 premium plus sedan steering wheel and it fits and works!

I really like this steering wheel cover! The quality feels great and, overall, I’m very happy with it. I do think a lighter gray color would have looked better in my car, but that was my mistake when choosing the color.The installation does take some time — it took me around four hours. My only suggestion would be to include more detailed step-by-step instructions. I actually had to look up a few YouTube tutorials to figure out how to install it properly.One funny thing that happened right after I installed it: the very next day, I had to take my car to the mechanic for a routine checkup, and the steering wheel got some grease and dirt on it. Luckily, I was able to clean it easily with a makeup brush, a little bit of water, and shampoo. It came out looking great again! Overall, I’m really happy with it.

Legit! Stearing wheel on my '93 Civic feels good to me and I didn't want to replace it with another wheel so I got this to make it look nice and possibly better the feel.The leather smelled great. More than enough quality thread. Was fun to put on. I got myself worked up watching too many YouTube videos and thought this would be more difficult than it was. It did take three hours, but I took my sweet time.Wife's car is next; I am going to buy another one. Looks incredible! Feels great!

Overall, I’m very happy with how this steering wheel cover upgrade turned out on my 2013 Honda Civic. The installation was not perfect on my first attempt, but with patience and attention to detail, the final result came out great.I am not a professional installer, so I believe most people with basic tools and enough patience can complete this upgrade themselves. The material and overall appearance made a big improvement compared to my original worn steering wheel.My only suggestion for improvement would be for the product to include written instructions or a step-by-step installation video specific to this model. I had to search online for guidance, and while there were helpful videos, I could not find one exactly matching this version.Overall, I would still recommend this product to anyone looking to refresh the look and feel of their steering wheel. Just take your time during the installation process and the end result is worth it.

This went on nicely and was pretty easy to install. I’d say if you are able to lace athletic shoes you will be successful at installing this cover.It may look like it won’t fit at first but it has a lot of stretch to it and will easily for a 15” wheel. If you are having a hard time stretching it over I would say slip it on horizontally so half is on the front and half is on the back of the wheel then move the front portion so it’s seated on the bottom of the wheel and finally stretch the part that’s on the back side over the top of the wheel. If you are doing this on a cold day you might want to blast some heat from your heater or a hair drier on a low setting before installing for some more stretch.As for lacing it on, i watched the video on the image carousel of ice of the colours (I think it’s under black and red) and that helped me. Essentially you tie your lace to the inside stitching and then you are weaving the lace through the stitches on the outside. When lacing take your needle from the outer side (side with the holes or leather) of the stitch to the inner side (the edge of the leather). Hopefully that description might help someone that is struggling.Some tips, have a pair of decent scissors that will allow you to cut close to your knots and use a lighter to finish/seal your cut lace then press it with something metal (scissors for example) to flatten your knot and help prevent the knot from coming undone. Also, when you get to the posts you can take your needle through the stitch hole in the back and run it up and come back out to prevent having to cut your lace so much. To keep your lace from falling off your needle poke your needle through the lace and pull it down, if you seal the end with a lighter it should stay in place the whole time. You may also find using a curved upholstery needle helpful to adjust the tension of your lace as well as have an easier time going under the stitches.I am mostly happy with how the finished look is but I may cut it off and make a few changes as you can see the indent of the seams from my wheel. I can not speak for durability as it hasn’t been on for long, the only part I have some concern about is the loose parts that cannot be stitched due to the posts as I find myself playing with them while driving.

Nice leather. Smooth and nice to the touch. I have a 2003 Ford F350. The color match is a little off for the tan. It’s on the lighter side of tan. Stitching it on was fairly easy since I’ve done this before. The only gripe I would have is that once cinched down, it’s just a hair loose on the wheel. I suspect over time the leather will shrink down and it will attach to the wheel better. Overall, for the price, it’s worth it.

The leather quality is very good, buttery and smooth on the solid model. Took about 2 hours to install and I messed up a couple times, but easy to reverse if you don’t go too far. My 2008 Honda civic wheel was chunking away and this makes it look epic. If you have a bad rubbery steering wheel, take your time and use this cover, you will be suprised how nice it is to grab leather. Recommend.

Got the plain one (no holes). Great look great fit and my whole truck smells like leather now!It's a little tight on my Ford Ranger and you should watch some YOUTUBE videos on wheel cover installation before ordering this one.

Good leathers

Excellent fit for my 2006 Jeep TJ and although no instructions YouTube has plenty of videos. It comes with 2 needles and thread lengths and 1 was perfect amount for a jeep.

This steering wheel cover was great, especially for the price. I saw that the people who complained were giving pictures and they were sewing it on incorrectly. They were showing it in the holes of the leather, and you're not supposed to do that. If you just look at the instructions or look at the pictures how they show you how to do it it would looks great.

This is a good leather steering wheel cover. It looks nice and works nicely. I would like a clearer diagram of how to do the stitches to look like the examples, but overall would by again without hesitation.Size was right, the softness is nice, the stitching is done well, and it provides a good grip.

It says it won't, but I do not live somewhere hot and yet the one day there was sun, the steering wheel was scorching. Looks really nice though, so it's not that big a deal. Also having it sewn on is just so much nicer than any steering wheel cover that's just popped on.